Best sellers
Galvanized Steel: - 28 gauge - compatible with all materials except copper and mill finished aluminum - shipping weight: 22 lbs. per box of 1,000 For use near the peak of the roof or areas of low...
304 Stainless Steel - 28 gauge - compatible with all roofing materials - shipping weight: 19 lbs. per box of 1,000 For use near the peak of the roof or areas of low expansion Available in...
Freund Tinman’s PVC Sheet Metal Mallets come in a variety of shapes and sizes and are perfect for old-world sheet metal crafting.
For single locking the 5/8" (0.625") wide standing seamSingle lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill...
One gets an unique tool building at any slope for tile edges, jaw length: 2 3/4", height 1 1/2", tool length: 14 1/4"
For double locking the 9/16" (0.562") or 5/8" (0.625") wide standing seamDouble lock hand seamerForms the 180 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight...
Stainless steel,1/8“ - 4 3/4“ 0.14lb 5 1/2" total length
One gets an unique tool building at any slope for tile edges, jaw length: 2 3/4", height 1 1/2", tool length: 14 1/4"
The squareseam-folder is the ultimate tool joining prefabricated SPM-profiles. Even at dormer windows with a small radius one joins lockseam without difficulty, it can be used to tack up lengthwise...
Toolwidth of 10" allows quick and accurate sheet metal shaping constructing eaves, gutters, dormer windows etc., if needed a spacer can be put on at the eccentric pivot to create edges in excess of...
The jaw width of 8 3/4" enables quick and accurate folding of eaves sheet, tool width: 8 3/4", height: 2 1/3", length: 15 3/4"
This manually operated squareseamfolder joins SPM 30/80 profiles, smooth lead-on avoid marks at the transitions, it is easy to handle when working on extreme angular sheating, the tool may also be...
It allows simple and quick shaping of locked sqareseam into double-seam in just one operation , do not use to close a square seam! Tool width: 8 2 / 3 “, clawheight: 2“, length: 28 3/8"
One gets a unique tool building any slope at tile edges, jaw length: 9 7/8“, height: 1 1/2“, tool length: 27 1/2"
It allows simple and quick shaping of locked sqareseam into double-seam in just one operation , do not use to close a square seam! Tool width: 8 2/3“, clawheight: 2“, length: 28 3/8“
For use like no. 91170000 Do not use to close a squareseam! Tool width: 8 2/3“, height: 2 3/4“, length: 28 1/3"
Compound leverage, PVC-coated handles; right; 0.99 lb, 11“
The grinding of the facet is only on one side, for working on both sides of the anvil, with nail puller, handforged, lengthened leather handle, polished finish, head, tip and facets inductively...
