Best sellers
Galvanized Steel: - 28 gauge - compatible with all materials except copper and mill finished aluminum - shipping weight: 22 lbs. per box of 1,000 For use near the peak of the roof or areas of low...
304 Stainless Steel - 28 gauge - compatible with all roofing materials - shipping weight: 19 lbs. per box of 1,000 For use near the peak of the roof or areas of low expansion Available in...
Freund Tinman’s PVC Sheet Metal Mallets come in a variety of shapes and sizes and are perfect for old-world sheet metal crafting.
For single locking the 5/8" (0.625") wide standing seamSingle lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill...
One gets an unique tool building at any slope for tile edges, jaw length: 2 3/4", height 1 1/2", tool length: 14 1/4"
Stainless steel,1/8“ - 4 3/4“ 0.14lb 5 1/2" total length
The jaw width of 8 3/4" enables quick and accurate folding of eaves sheet, tool width: 8 3/4", height: 2 1/3", length: 15 3/4"
Active filters
Freund Seaming pliers, straight, lap joint, 60 mm. Precoated Handles. Insertion Depth 2 1/2" Jaw Width 2 3/8" 1.54lb
Straight, lap joint, precoated handles. Insertion depth 1 1/4" jaw width width 7/8" 0.4lb
Seaming pliers, straight, lap joint, 40 mm Insertion Depth: 1 7/8" Jaw Width: 1 5/8" 1.21lb
Seaming pliers, straight, lap joint, 100 mm. Ideal for seams and hems. Insertion Depth 2 1/2" Jaw Width 3 7/8" 2.54lbs
Seaming pliers, bent of 45°, lap joint, 22 mm. Insertion Depth 1 1/8" Jaw width 7/8" 0.42lb
45° Seaming pliers, lap joint, precoated handles insertion depth: 1 7/8" jaw width: 1 5/8" 1.32lb
45° Seaming pliers, lap joint, precoated handles insertion depth: 1 7/8" jaw width: 2 3/8" 1.54lb
45° Seaming pliers, lap joint, precoated handles insertion depth: 1 7/8" jaw width: 3 1/8" 2.04lb
Seaming pliers, bent of 45°, lap joint, 100 mm; 2.54lbs Insertion depth: 2 5/8" Jaw width: 3 7/8"
Seaming pliers, bent of 90°, lap joint, 40 mm; 1.32lb Insertion depth 2 1/8" Jaw width 1 5/8"
