A large selection of the best hand tools for sheet metal roofing professionals.
Best sellers
Galvanized Steel: - 28 gauge - compatible with all materials except copper and mill finished aluminum - shipping weight: 22 lbs. per box of 1,000 For use near the peak of the roof or areas of low...
304 Stainless Steel - 28 gauge - compatible with all roofing materials - shipping weight: 19 lbs. per box of 1,000 For use near the peak of the roof or areas of low expansion Available in...
Freund Tinman’s PVC Sheet Metal Mallets come in a variety of shapes and sizes and are perfect for old-world sheet metal crafting.
For single locking the 5/8" (0.625") wide standing seamSingle lock hand seamerForms the 90 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight and easy to useWill...
For double locking the 9/16" (0.562") or 5/8" (0.625") wide standing seamDouble lock hand seamerForms the 180 degree bendFor hard to reach placesTo start or finish (or an entire roof)Lightweight...
Stainless steel,1/8“ - 4 3/4“ 0.14lb 5 1/2" total length
One gets an unique tool building at any slope for tile edges, jaw length: 2 3/4", height 1 1/2", tool length: 14 1/4"
for single or double locking standing seams For single or double locking standing seams Simple and original method Ergonomic handle has several flat surfaces for firm grip and control Made in USA
for single or double locking standing seams For single or double locking standing seams Simple and original method Ergonomic handle has several flat surfaces for firm grip and control Used in...
Bending range from 3/8" min to 6-1/2" max 90 degree edge roller Industry exlusive angled roll for a true 90 degree bend Angled roll provides 12 degrees additional clearance 9" overall adjustable...
Will bend the 90 degree down to 180 degrees, maximum 1" hem 180 degree edge roller Industry exlusive spiral scratch guard Top mounted roll prevents forming roll from scratching surface Will bend...
For manual folding of drip edges Available in 16", 18", or 20" wide Made in the USA
ESE Bread Pan Tool For manual folding of metal up into a bread pan at the top of a section of a panel Made in the USA
Seaming pliers, bent of 45°, lap joint, 100 mm; 2.54lbs Insertion depth: 2 5/8" Jaw width: 3 7/8"
Seaming pliers, bent of 90°, lap joint, 40 mm; 1.32lb Insertion depth 2 1/8" Jaw width 1 5/8"
Seaming pliers, bent of 90°, lap joint, 60 mm; 1.65lb Insertion depth 2 1/4" Jaw width 2 3/8"
Seaming pliers, bent of 90°, lap joint, 60 mm; 2.32lbs Insertion depth 2 5/8" Jaw width 3 1/8"
Straight, lap joint, precoated handles Staked Joint width 3 1/8" 1.87lb
Straight, lap joint, precoated handles Lap Joint width 3 1/8" 1.76lb
